Reload Original in the Automatic Document Feeder (Adf) and Try Again

  • OfficeJet Pro 8620: ADF Scan black line down

    Hi

    When I scan documents using the ADF, I get a black line at the bottom of each page (only the right side of the book). I tried to clean than the pocket-sized scanning area - merely I still become the blackness line - any idea how to go rid of him?

    Y'all can download a sample scan pages virgins og hither: https://files.secureserver.net/0s4RbMeFgHa3lX

    I just wanted you to day.

    Later on replacing the printer OfficeJet Pro unit 8620 three times (when having tried iv) and I tried a HP Officejet Pro 276dw with the aforementioned problem, I ended upwards cancelling my order and get my coin back.

  • OfficeJet Pro 8620: Paper feed problem

    New Machine - age for a twenty-four hours. Follow the installation procedure and a tray loaded with proficient paper 20 # 8-1/2 "x 11". When I ship a print job to the printer - the finished sheet is great except for a double crease to the top of the canvas. It's as if she gets stuck, deform the sheet and and then it ends. It is not appropriate for an office surround.

    This printer has a duplex on the back unit.

    Secondly when I put the tray paper for 4 X 6 photo paper and load the tray... it won't pull the paper and printing. The mistake message says to check the configuration of the status bar and load the paper - I accept already washed.

    Hullo @Scott18,

    Welcome to the Forums of HP Back up!

    I empathise that your day an one-time printer HP OfficeJet Pro 8620 is the rustle of newspaper and practice not impress on newspaper 4 ten half dozen. I would exist glad to aid and don't forget to come back to this thread and cheque "Accept every bit Solution", if I have successfully helped solve you lot the trouble. If yous want to say 'Thank you' to my endeavour to aid, click on the "thumbs up" to give me a Kudos.

    I can certainly understand how it would brand yous questions in an part environs. Looks like it's that a barrier inside the printer or a roller is defective.

    To try to fix the trouble, I advise that take a expect deeper inside the printer with a flashlight to see if you can decide the cause.

    Please, effort the steps in these guides:

    • Displays a Bulletin "paper jam".
    • Displays a Message 'Transport Jam'

    Note: Some steps several times may help solve the problem.

    If you have completed all the above steps and your product still has a trouble, service the product. If the printer is within the buyers remorse period, put the printer in the point of sale or contact HP.

    Contact HP for service in all countries except Asia-Pacific.
    What you tin do, is to utilise the following link to create yourself a file number, so call and it tin assistance to expedite the entreatment process:
    Stride ane. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Pace 3. Scroll up to "withal need aid? Fill out the form to select your contact options.
    Stride 4. Gyre downward and click on: contact HP options - click Get phone number
    File number and phone number are displayed.

    Delight reply to this message with the consequence of your troubleshooting. I can't wait to hear strings attached good luck!

  • OfficeJet Pro 8620e ADF jam error afterward firmware update

    Afterwards yous install the updated firmware from the impact screen of the printer, the printer restarts and at present has an error that says "Original is caught in the ADF (ADF).  Open the cover of the ADF, remove and reload the original, then try again. »

    I went through all the steps to articulate a jam from the ADF, but the opinion is persistent.  It is non (and was not before the upgrade) in the ADF at all.  Since this coincided with the update of the firmware, my suspiscion is that the firmware has not installed properly or something.  What am I doing here?

    This problem has been resolved using the printer instead of buy and exchange for some other.  I can inappreciably believe that the cables are working loose within two weeks, she was detained and and then broke at the verbal time that the firmware update has been completed.  In any case, the problem was solved by replacing the printer.  I don't have any feedback solutions until a month after I did.

  • HP Officejet Pro 8615: ADF non pull the documents for scanning

    I was initially able to browse several documents in the automatic document feeder, when I created my machine, but at present I can scan only 1 document at a time on the glass. I have the good setting chosen "choice the busy document feeder" in the settings, but there is not away from there? Aid!

    Hello

    Thank you for using the HP forum.

    Tin yous open the ADF and look for whatever paper droppings?  Was there a "Ding" when you load your document into the ADF?

    In improver, the Green must lock be in central position (you can try to push forward and backwards, it should be in key position)

    Thank you.

  • HP Officejet Pro 8500: Paper feeding issues

    Why my printer HP Officejet Pro 8500 has constant pain to pick up the first sail of paper, when the 'Impress' is selected.  He invariably through a blank sheet and so gives the bulletin "on newspaper" when the newspaper is in the tray.  It'due south same with envelopes.  Frustrating!

    The troubleshooting in the hither certificate steps tin help solve problems loading the newspaper in the printer Officejet 8500.  Delight go through all the steps in order.

  • HP Officejet Pro 8500 first: Feeder does not

    Hello:

    I use a HP Officejet Pro 8500 showtime all-in-one printer, and recently I started having issues with the document feeder. It always saves when a document is sitting there, merely when I choose "Scan" it makes a really loud grinding noise, curt and says that I need to reload the document, and so try again. I also noticed that the roller is demeaning non himself, he is already lowered when I place documents in now. I think that maybe that's the problem.

    I also have the fault 'Pump motor Stall' when I restart the device.

    No idea how can I fix? I scan a large number of documents in the office and the document feeder is quite crucial for time direction.

    Thank yous!

    Hello @ddehner523and welcome to the Forums of HP, I hope yous enjoy your experience!

    I run across that you take questions near your feed paper.  I would like to assist!

    I recommend to remove printer ink cartridges and reset the power supply.  Unplug the power cord from the printer and the power outlet, and so wait 60 seconds. After threescore seconds, plug back in the printer. Brand sure that you connect the printer directly to a wall outlet. Make sure to bypass whatsoever surge protector or power bar.

    I would also turn on the power of the printer into a unlike wall outlet.

    Good luck and please allow me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

  • OfficeJet Pro 8610: Newspaper feeding problems

    Is it possible to manually feed a single canvas of newspaper in the 8610?  I have sheets simple transmission power in my old Lazerjet 4Plus and notice it convenient if I use 'proficient side paper '. (reuse, recycling)

    @Arnot41

    Welcome to the Customs Forum of HP.

    I don't think you can "unique paper source" in this printer.

    Part of the trouble could be the way the printer picks upward the newspaper - the mechanism (rollers, power, sensors) - must exist "so" or something tin can glitch and y'all might go an fault any.

    Bold that the paper is the same quality paper that could be used in the printer in any example, information technology is standard twenty # bnd, white newspaper, or some other high-quality brand HP or equivalent, and then the following should work:

    Yous might exist able to 'practiced use' book on top of new newspaper in the tray from the stack and utilize it that way.  If the printer not to panic because of the paper with something printed on the dorsum of the newspaper, it should work.

    Stack the newspaper into the tray with the make clean side to print "hidden face".   This means that the 'already printed side' will be visible when the paper is in the tray.

    You tin can endeavour information technology certainly - if the printer doesn't like it, it will tell yous on this bailiwick.

    The 8630 Pro OfficeJet print on paper one side "already used" - I merely tested.

    When you see a post that will help you lot,

    Who inspires you, gives a cool idea,

    Or you acquire something new.

    Click the 'Thumbs Up' on this mail.

    My answer-click have as Solution to aid others to find Solutions and answers!

  • HP Officejet Pro L7780 - certificate feeder does non concenter pages. The charger did not issue in pages using

    I have an Officejet L7780 which is not driven by the document feeder. He finds himself with the first folio and try to in the folio but it gets stuck with information technology.  I wasn't able to get through, but I can enter a function of the page that is stuck and shoot OK.  It seems that the rollers do non piece of work much more.  Is this something that tin can be corrected/fixed/replaced?

    How-do-you-do

    Make sure y'all utilise media supported (weight/type).  If you often use your ADF, you can take an accumulation on the pick up rollers.  I accept included a link below that describes how to make clean them and how practice I cheque to make certain that at that place is no piece of newspaper stuck nether the hood of the ADF that would prevent to depict correctly.  Skillful luck!

    http://support.HP.com/usa-en/document/c02019585

  • HP Officejet Pro 8600: newspaper feeding problems

    Help!   My printer has all suddenly decides to endeavour to feed a bunch of newspaper at the same time, ruining the leaves.  May 6-12 pages.

    I don't know the terminology to search for this trouble.  There are times when newspaper changes (for instance the new colour), simply non always.  Hate waste, hate to lose the Canton. Should I clean something?

    Welcome to the HP community @macandsons!

    I came across your message on several pages of food through your Officejet 8600 and wanted to pop in to assistance. I would similar to see you link below and effort the steps in the gild for that matter. Generally a good cleaning roll will assist this blazon of concern. If you still find the printer pull in several sheets of paper, then I recommend finally telephone call phone support to talk of a replacement printer.

    More than than one Page at a time feeds through the printer

    If you take problem, let me know and I'll do my best to help.

    Hit the "take every bit Solution" if nosotros reached a solution and the "thumbs up" to say cheers for my help.

    Have a nice 24-hour interval

    HP technical back up are available by clicking on the following link:

    http://h22207.www2.HP.com/us-en/?openCLC=true

    (one) one time the page opens, please select the country in which y'all are located. Then enter your model of HP on the right number.

    (ii) then choose "Contact the Support" tab at the superlative and scroll to the bottom of the page "HP Support - contact" to fill out the grade with your details.

    (3) Once finished, click the "Evidence Options" at the bottom right.

    (iv) Finally, scroll to the bottom of the page and select "Become a phone number." A file number and telephone number will now fill for you.

  • HP Officejet Pro 8600: Document feeder causing vertical lines in copying and scanning

    When I copy or scan via the document feeder I become two vertical lines on the re-create or scan.  How tin I fix it?

    Hello @aadmin, hope yous are well!

    Thank you for becoming a fellow member of the HP Forum. Information technology'southward a great identify to get help from the customs, to get suggestions and notice what has worked for others.

    I sympathise that you are facing bug while scanning / copying using the ADF. Please, effort the post-obit steps to resolve this problem.

    1. Make a blank copy using the ADF. Ideally, y'all should get a bare document with the ii vertical lines.
    2. Continue the page out on your dish / the main scanner bed facing yous.
    3. Follow the line or streak on the newspaper to the box on the ADF drinking glass is the origin of the problem. Carefully clean the thin "strip of chapeau of scanner ADF white' and 'the band drinking glass ADF Scanner' with a damp lint textile.
    4. See the figure beneath. 3 is the glass Strip ADF & two is the white cover ADF scanner.

    These measures should exist the instance, I would like to know the results.

    See you presently

    Please click on 'acceptable' on the post that solves your trouble to help others to find the solution. To show gratitude for my assistance, please click the 'Thumbs Up icon' below!

  • HP Officejet Pro 6835: Double feed detection

    Whatever recommendation for a printer with Double feed detection and automatic framing is cheap.

    I worked on several printers HP and only time wherever they detect that a double is when 2 sheets of paper are slightly out of sync and it STINKS that is detected in a room that was besides long.

    If yous are looking for a multifunction device which detects the ADF hp multifeeds has those, just it's not going to be on a cheap machine.

  • OfficeJet Pro 8500 a feeding of re-create a line from the top down

    By feeding on copy a line from the top down

    Hello

    Please visit the link below to fix the problem.

    http://support.HP.com/u.s.-en/certificate/c02207107

  • OfficeJet 6700 Premium: adf separator pad

    The ADF rubber pad has fallen.  The absorber is not damaged; but I can't reinstall and without the cushion, no flow.

    Hey @stephinola,

    Welcome to the Forum from HP Back up.

    I meet that yous are having a hardware problem with your HP Officejet 6700 Premium due east-all-in-one printer. I would like to advise you on this.

    I had a look at HP PartSurfer to see if it would be possible to order a replacement ADF for your 6700. You lot can click here to see the complete list of spare parts - the ADF is non i of them. If you wish, you can continue the official maintenance options, in which instance, I recommend that bring together you our technical back up team. You can click on the post-obit link to get-go a business: www.hp.com/contacthp/

    In one case y'all consummate the form online to build your business, yous can choose among dissimilar ways to contact direct.

    Alternatively, if yous feel more gung ho to keep the 6700 in service a little longer, you can try a repair DIY ADF. Look for a brand of crazy glue that would piece of work with the materials of your printer and effort to stick the postage on the ADF. If you can live without ADF, you should always be able to scan from the flatbed glass.

    Let me know if it helps. Thanks for posting in the Forum from HP Support.

    Good luck

  • OfficeJet 8500 function ADF simplex vs. duplex

    The 8500 I just bought will not print 2 copies of the ADF confront.  The manual says this simply available on some models.  So, I came beyond the site of HP to find what models have press duplex, ADF, so you can feed a two originals face through the ADF and re-create both sides of the newspaper without having to dispense the document and render it manually.  But that info is not listed in one of the specifications for the 8500 models.  They say they're going to copy ii sides.  Then I checked the manuals online here and found there is one manual for all models and all the transmission says is that this characteristic is included on some models, just does not say which ones who.  So I checked the troubleshooting and found a FAQ which addressed this issue but, again, he didn't say which models include printing duplex, ADF.

    Can someone tell me which of the 8500'southward accept the ADF dupexing?  If you could post the existent model number, not the A90 number... but the CB... in the back of the printer model number, I'd be very happy.

    TIA.

    Yes, I contacted HP and they said that none of the 8500 models can copy both sides using the automatic feeding system.  So if y'all want to make ii copies of faces through the autofeed status bar, you need to practise a page at a time, flipping between pages.  Peachy fight and defeats the purpose of having a photocopier with a duplexer, IMO.

    I stick to my Officejet L7780.  Information technology will automatically practise a fifty-page document, through the autofeeder, both parties.  I love.  I was purchase and repair for the last couple years at present.  You lot can find recharged cartridges for $20 on ebay that piece of work great.  Now only need a cheaper source for the impress heads, and I'll be set!

    Good luck.

  • polkthawased01.blogspot.com

    Source: https://www.eehelp.com/question/officejet-pro-8620-hp-officejet-pro-8620-adf-feeder/

    0 Response to "Reload Original in the Automatic Document Feeder (Adf) and Try Again"

    Post a Comment

    Iklan Atas Artikel

    Iklan Tengah Artikel 1

    Iklan Tengah Artikel 2

    Iklan Bawah Artikel